answer

watching

views

16 Aug 2018

QUESTION 1: Escherichia coli is characterized as a facultative anaerobe. You set up an experiment to examine the growth of Escherichia coli in three environments: a GasPak jar (0% oxygen), a candle jar (10% oxygen), and the benchtop (22% oxygen). Aside from differing oxygen levels, all other culture conditions (such as temperature and media used) were kept constant. Which of the following represents the most likely outcome of the experiment?

A. E. coli will have heavy growth on the benchtop, moderate growth in the candle jar, and no growth in the GasPak jar.

B. E. coli will have heavy growth on the benchtop but moderate growth in the candle jar and the GasPak jar.

C. E. coli will have heavy growth in the GasPak jar and moderate growth in the candle jar and the benchtop.

D. E. coli should grow equally in all three growth environments.

QUESTION 2: Chloroflexus aurantiacus is a photoautotrophic bacterium that grows in hot springs. Which of the following serves as an energy source for C. aurantiacus?

A. The sun

B. Glucose (C₆H₁₂O₆)

C. C. aurantiacus does not need an energy source

D. Carbon dioxide (CO₂)

QUESTION 3: You are a manufacturer of polypropylene hypodermic syringes. Which of the following methods would be best for ensuring sterility of this heat-sensitive material?

A. Non-ionizing radiation

B. Ionizing radiation

C. Pasteurization

D. Autoclave

QUESTION 4: What is the primary difference between a disinfectant and an antiseptic?

A. Disinfectants are low-level germicides, whereas antiseptics are high-level germicides.

B. A disinfectant is microbiocidal, whereas an antiseptic is microbiostatic.

C. A disinfectant is used to decontaminate critical equipment, whereas an antiseptic is used to decontaminate semicritical equipment.

D. A disinfectant is used to decontaminate lifeless objects, whereas an antiseptic is applied to living tissue.

QUESTION 5: Your patient is receiving a spinal fusion to correct a skeletal defect. Which of the following germicides is recommended to sterilize the bone used for the transplantation?

A. Isopropanol

B. Detergent

C. Ethylene oxide

D. Chlorine bleach

answer

watching

517

views

For unlimited access to Homework Help, a Homework+ subscription is required.

You have 0 free answers left.
Get unlimited access to 3.8 million step-by-step answers.

Get unlimited access

Already have an account? Log in

Bunny GreenfelderLv2

18 Aug 2018

Unlock all answers

Get 1 free homework help answer.

Already have an account? Log in

Related questions

2.Conclusion:

What have you learned from your study?

Interpret your data/ results:

Do your results support of disprove your hypothesis?

Compare and contrast your result with those of previous research.

Significance of the results: âBig Pictureâ

What is the global impact of your results?

What questions remain unanswered?

What kinds of experiments can come out of your study?

i have lab for biology and i need help with the Lab Report

the lab name is Bacterial Transformation Lab

1. Introduction:

Introduce the background and the nature of the problem your experiment is investigating.

Summarize the current knowledge of your subject.

Use examples of other research that have examined the same or a similar topic as your experiments.

Ending your introduction:

State your hypothesis

State your predictions

Give a brief statement about how you tested your hypothesis.

please help me with it is important for my lab class tomorrow

that is the lab i put the info please help me for the intro and for number 2 please be clear please

i would be happy if you help me it is due tommorrow i realy need your help on the intro and number 2 please be clear and show clear work hope you do it because it is due tomorrow

Bacterial Transformation Lab

Genetic engineering is one of the newest applications of basic knowledge in biology. It involves the isolation of specific genes from one organism and the insertion of those genes into a second organism of the same, or even different, species. Remember that a gene is a piece of DNA which codes for a product, usually a protein, which gives an organism a particular trait. The development of these techniques has generated considerable excitement and answered many questions, but it has also raised questions. Many scientists and others see genetic engineering as offering opportunities to make life better, for example, by exploring how genes are regulated, by curing diseases of genetic origin, by adding desirable traits to agricultural crops such as the ability to fix nitrogen in corn and pest resistance in cotton, and by genetically altering bacteria with genes enabling them to digest oil spills.

For almost 100 years, it has been possible to isolate DNA from cells, but only in the last 40 years or so has its function been understood. Your textbook discusses the work of such investigators as Fred Griffith and Oswald Avery, who demonstrated that if DNA was isolated from a pneumonia-causing strain of bacteria and added to cultures of nonvirulent bacteria, the recipient cells were transformed into virulent types that caused pneumonia. These transformation experiments were the first to show that genes could be artificially transferred in the laboratory. Since the time of those experiments (Avery's work was done in the 1940s), our knowledge of gene structure, function and control has increased astronomically. The application of this knowledge has created the field of genetic engineering.

Modern genetic engineering techniques depend on three critical factors:

A suitable host organism in which to insert the foreign gene;

A vector to carry foreign genes into the host; and

A means of isolating the host cells that have taken up the foreign gene.

The host organism

The most commonly used host organism is the gut bacterium Escherichia coli (E. coli). Its chromosome is a single large circular DNA molecule, called the genomic DNA, containing about 4 x 10⁶ base pairs. Not every cell will take up foreign DNA when exposed to it, but E. coli grows rapidly, dividing in less than 20 minutes, so that a single cell can give rise to a billion genetically identical descendants in a matter of 10 hours. Thus, a few transformed cells can provide a large number of offspring within a day. The strain we are using is K-12.

The vector

A vector is a DNA molecule used as a vehicle to carry genes from one organism to another. This DNA molecule can be modified by gene-splicing techniques using restriction enzymes and ligases so that it carries the genes of interest (essentially a cut-and-paste operation). Sometimes viruses are used as vectors, but for E. coli, plasmids are often used. A plasmid is a small circular DNA molecule containing 1000 to 200,000 base pairs. Plasmids exist naturally in many strains of E. coli and other bacteria. Plasmids replicate as the cell grows, independent of replication of the genomic DNA. These plasmids are transmitted to each of the product cells during cell division. Plasmids carrying genetic information that is beneficial to the host cell are maintained in a given population by natural selection. Plasmids frequently carry genes that confer antibiotic resistance, an obvious benefit.

When E. coli cells are exposed to plasmids or any other foreign DNA, some of the cells, called competent cells, will take up the DNA. We can induce cells to become competent by treating them with divalent cations, such as Ca⁺⁺, followed by a brief exposure to high temperature, called a heat shock treatment. Exactly how this treatment causes cells to become competent is not understood, but it is described as making the membranes "leaky" so that large DNA molecules (like plasmids), which would not normally pass through the cell membrane, can enter the cell. This treatment does not make all cells competent, but it greatly increases the number of competent cells. Once in a cell, the plasmids replicate and are passed to the product cells during cell division.

The selective medium

The last requirement for genetic engineering is a means of isolating host cells that have taken up the gene of interest. The techniques used depend on the growth requirements of the host organism. For example, each species of bacteria has particular nutrient requirements. The composition of the growth medium (agar or broth) can be modified to allow growth of only certain bacteria -- for example, by adding or removing nutrients or other chemicals from the medium mixture. This modified medium is called a selective medium, because it selects for the growth of only some species. By introducing an antibiotic such as ampicillin into the medium in which the bacteria are grown, you will select for growth of only those bacteria carrying the antibiotic-resistance gene on newly acquired plasmids. In a matter of days, billions of antibiotic-resistant cells, all with the plasmid, can be grown.

Genetic engineers use a modification of this technique to insert a foreign gene into E. coli. In simplified terms, the plasmid (already carrying an ampicillin resistance gene) is modified by inserting the gene of interest. The gene of interest has been isolated from another source; for example, the gene for human insulin has been isolated from the human genome. The modified plasmid, carrying the inserted gene, is then mixed with competent E. coli and the bacteria are placed in a medium containing ampicillin. Only those cells that have the plasmid will grow in the medium, and they are also the cells carrying the insulin gene (in their plasmids). These selected cells can now be used to manufacture insulin, which can be used for insulin therapy by diabetics.

The genes

In the following experiment, you will insert a plasmid into E. coli. The plasmid you will use carries the gene bla, which codes for a protein (beta-lactamase) that is secreted by the bacteria, inactivating the ampicillin in the agar and allowing for bacterial growth. The plasmid also carries an indicator gene. The indicator gene we are using was isolated from a bioluminescent jellyfish, Aequorea victoria. It codes for Green Fluorescent Protein (GFP).

The GFP gene has been modified to include a regulator system that can be used to control the expression of the gene. Gene expression in all organisms is carefully regulated to allow for adaptation to differing conditions and to prevent wasteful overproduction of unneeded proteins. The genes involved in the breakdown of different food sources are good examples of highly regulated genes. For example, the sugar arabinose is both an energy source and a carbon source for bacteria. The bacterial genes that make digestive enzymes to break down arabinose for food are not expressed when arabinose is not in the environment. But, when arabinose is present, these genes are turned on. When the arabinose runs out, the genes are turned off.

Arabinose initiates transcription of these genes by promoting the binding of RNA polymerase. In the genetically engineered pGLO DNA, some of the genes involved in the breakdown of arabinose have been replaced by the jellyfish gene GFP. When bacteria with this plasmid are grown in the presence of arabinose, the GFP gene is turned on and the bacteria glow green in UV light. When arabinose is absent form the growth medium, the GFP gene remains turned off and the colonies appear white. This is an example of the central molecular framework of biology in action: DNA ? RNA ? protein ? trait.

In summary, you will render E. coli cells competent to take up plasmid DNA. The plasmid carries two identifiable phenotypic markers:

The beta-lactamase or bla gene codes for resistance to the antibiotic ampicillin. We will use this to select for bacteria that have taken up the plasmid.

The pGLO gene codes for Green Fluorescent Protein (GFP), which is switched âONâ if arabinose is present.

Safety Procedure

For your own safety and the safety of others, it is essential that you follow all instructions about handling bacteria and disposal of materials. When you finish work for the day, swab your table with disinfectant. WASH YOUR HANDS thoroughly with soap before leaving the lab for any reason, and at the end of the day after you have cleaned your table. Report any spills to your instructor.

List of Materials

Prepared agar plates (2 LB, 2 LB/amp, 1 LB/amp/ara)

Transformation solution (50 mM CaCl₂, pH 7.4)

LB broth

1 pack of inoculation loops

Sterile transfer pipets

1 foam microtube holder w/ tubes

E. coli starter plate

1 red biohazard bag for loop disposal (common use â Loops/pipets only - NO PAPER!!!)

beigefox320

HELP ASAP; Please help me understand my lab results, so be detailed to clearly understand

Then , Please include answers to the question below to include in your response

1. what role does ampicilin (amp) and arabinose (ara) play in the experiment.

2) Because GFP was isolated from jelly fisht, what modification to the GFP DNA had to be made to result in expression in E. coli?

BACKGROUND INFORMATION

Transformation of GFP and the pGLO Plasmid GFP is a commonly used reporter protein in research labs, as the fluorescence creates a marker protein that can be used in many types of cell biology and biochemical studies. In basic research, GFP is often fused to a specific target protein of interest, creating a chimeric reporter protein. GFP has been used as a reporter protein to study blood vessel and tumor progression in mice, brain activity in mice, and malaria eradication in mosquitoes for instance (see website mentioned in notes). In the first week you will use a procedure to genetically transform bacteria with the gene that codes for Green Fluorescent Protein. Following the transformation procedure, the bacteria express their newly acquired jellyfish gene and produce the fluorescent protein, which causes them to glow a brilliant green color under ultraviolet light. During the second week you will purify the protein away from all of the other proteins produced by the bacteria using chromatography, and during the third week you will evaluate the success of the purification procedure and estimate the size (molecular weight) of GFP by using sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). Fundamental to the process of genetic transformation of bacteria are plasmids. In addition to one large chromosome, bacteria naturally contain one or more small circular pieces of DNA called plasmids. Plasmid DNA usually contains genes for one or more traits that may be beneficial to bacterial survival. In nature, bacteria can transfer plasmids back and forth allowing them to share these beneficial genes. This natural mechanism allows bacteria to adapt to new environments. The occurrence of bacterial resistance to antibiotics is due in large part to the transmission of plasmids which contain antibiotic resistance genes. The pGLO plasmid contains the gene for GFP, and also contains the gene for the enzyme Î²-lactamase (bla), which provides resistance to the antibiotic ampicillin. The Î²-lactamase protein is produced and secreted by bacteria that contain the plasmid. Î²-Lactamase inactivates the ampicillin present in the LB nutrient agar, allowing bacterial growth. Only transformed bacteria that contain the plasmid and express Î²-lactamase can survive on plates that contain ampicillin. Only a very small percentage of the cells take up the plasmid DNA and are transformed. Untransformed cells cannot grow on the ampicillin selection plates. pGLO also incorporates a special gene regulation system, which can be used to control expression of the fluorescent protein in transformed cells. The gene for GFP can be switched on in transformed cells by adding the sugar arabinose to the cellsâ nutrient medium. Selection for cells that have been transformed with pGLO DNA is accomplished by growth on antibiotic plates. Transformed cells will appear white (wild-type phenotype) on plates not containing arabinose, and fluorescent green when arabinose is included in the nutrient agar medium.

The transformation procedure involves three main steps. These steps are intended to introduce the plasmid DNA into the E. coli cells and provide an environment for the cells to express their newly acquired genes. 1) Cells are first treated with a solution of CaCl2, which is thought to neutralize the repulsive negative charges of the phosphate backbone of DNA and the phospholipids of the cell membrane, allowing the DNA to adhere to the cells. This is referred to making the cells âcompetentâ (i.e. the cells are capable, or competent, to take-in exogenous DNA). 2) Cells are then subjected to a heat shock, which is thought to increase the permeability of the cell membrane, allowing the cells to take-in the plasmid DNA. 3) Cells are allowed to grow in a ârecoveryâ phase in the absence of ampicillin. During this time the cells begin to produce the Î²-lactamase protein, which will allow them to survive when they are subsequently placed on agar plates containing ampicillin.

For the first week section of lab

To eac

h of two microfuge tubes, add 250ul of transformation buffer. Keep these tubes on ice.

Using a sterile loop, pick one colony of bacteria from the LB plate. Transfer this colony to one of the microfuge tubes.

Gently vortex the tube until the colony is dispersed. Repeat for the second tube. Add 0.08ug of DNA to one of these tubes (+DNA tube).

Incubate both tubes on ice for 10 minutes. Incubate both tubes at 42Â°C for 50 seconds.

Incubate both tubes on ice for 2 minutes. Add 250ul of LB broth to each tube and incubate at room temperature for 10 minutes. Flick each tube gently. Add 100ul of t

his transformation mix to the appropriate plates.

Results For plates:

+DNA: Has the E. Coli pGlo plasmid and - DNA plates do no have EColi pGLo plasmid .

Amp means ampiclin and Ara means arabinose on agar plates

+ DNA Plate LB/amp/ara--> white 9 colonies, Glow: yes

+DNA LB/amp--> 7 colonies, GLow: no

--DNA LB/AMP- 1 colony so no colony growth and no glovw

-DNA: LB--> many colonies, Glow: no

Please explain significance of result or thand the reason for the results in scientific terms based on the background information provided and your own knowledge to be detailed. Would these results be expected as wll.