PHYS 1501Q Lecture Notes - Lecture 20: International System Of Units, Elastic Collision, Projectile Motion

75 views3 pages

Verified Note

coralcat765

10 Oct 2018

School

UConn

Department

Physics

Course

PHYS 1501Q

Professor

Soroush Khosravi Dehaghi, Robert McCutcheon

For unlimited access to Class Notes, a Class+ subscription is required.

PHYS 1501Q verified notes

20/45View all

PHYS 1501Q Lecture 19: PHYS 1501Q - Lecture 19 - Forces and Potential Energy and Center of Mass

PHYS 1501Q Lecture Notes - Lecture 20: International System Of Units, Elastic Collision, Projectile Motion

PHYS 1501Q Lecture 21: PHYS 1501Q - Lecture 21 - Conservation of Linear Momentum and Rotational Kinematics

Document Summary

Physics 1501q - lecture 20 - center of mass and conservation of linear momentum. Key (in si units): t = time (s) x = distance (m) v = velocity (m/s) a = acceleration (m/s 2 ) = change in g = gravity = 9. 81 m/s 2. G = 6. 67 10 11 n m 2 /kg 2 m = mass (kg) Displacement of cm: r cm = ( m i r i ) / m. Velocity of cm: v cm = ( m i v i ) / m. Acceleration of cm: a cm = ( m i a i ) / m. If f net, external = 0, the cm won"t accelerate. The cm follows a path of projectile motion - this property allows us to track the paths of complex objects using prior knowledge ex. Two people on a boat (source: slide 15 of 10/10/18 lecture slides https://lms. uconn. edu/bbcswebdav/pid-2568153-dt-content-rid-38960772_1/courses/1188-uco.

2 Answers

Relevance

electron1
Lv 7

4 years ago

There are two forces that cause the wheelchair to accelerate. These two forces are the component of the wheelchair’s weight that is parallel to the hill and the force the boy exerts. The net force on the wheelchair is equal to the sum of these two forces minus the friction force. Let’s use the following equation to determine the acceleration.

vf2 = vi^2 + 2 * a * d

6.5^2 = 1.4^2 + 2 * a * 12.4

24.8 * a = 40.29

a = 40.29 ÷ 24.8

This is approximately 1.62 m/s^2.

Net force = 50.5 * 40.29 ÷ 24.8 = 2034.645 ÷ 24.8

This is approximately 82 N.

Force parallel = 50.5 * 9.8 * 2.40 ÷ 12.4 = 1187.76 ÷ 12.4

This is approximately 95.8 N. This force and the force that the boy exerts are the forces that cause the wheelchair to accelerate.

Net force = F + (1187.76 ÷ 12.4) – 41

Set the two net forces equal to each other.

F + (1187.76 ÷ 12.4) – 41 = 2034.645 ÷ 24.8

F = 41 + (2034.645 ÷ 24.8) – (1187.76 ÷ 12.4)

F is approximately 27.3 N

Work = [41 + (2034.645 ÷ 24.8) – (1187.76 ÷ 12.4)] * 12.4 = 337.9625 J
JupiterSky
Lv 6

4 years ago

His change in kinetic energy is due to gravitational- and his own work,

while the friction does negative work.

∆K = ∆U +∆W + ∆Wf

½m(Vf²−Vi²) = mgh + ∆W + Ff*d

∆W = ½m(Vf²−Vi²) − mgh − Ff*d

∆W = ½*50.5(6.5²−1.4²) − (50.5*9.8*2.4) − (−41*12.4)

∆W = 508 J

Still have questions? Get your answers by asking now.

Next Question

---

asked in Science & MathematicsPhysics · 8 years ago

What is the spring constant? please help me!!!!?

A block of mass 487 g is pushed against the
spring (located on the left-hand side of the
track) and compresses the spring a distance
4.7 cm from its equilibrium position (as shown
in the ﬁgure below). The block starts from
rest, is accelerated by the compressed spring,
and slides across a frictionless horizontal track
(as shown in the ﬁgure below). It leaves the
track horizontally, ﬂies through the air, and
subsequently strikes the ground.
acceleration = 9.81
 
A) What is the spring constant?
B)What is the speed v of the block when it leaves
the track?
C) What is the total speed of the block when it
hits the ground?
...Show more

Update:

Height Above ground = 1.9 m
Lands = 4.59m away

What is the spring constant? please help me!!!!?

3 Answers

Relevance

Jánošík
Lv 7

8 years ago

Favorite Answer

I'm sure there is some crucial information in "the figure below" !!!

Edit:

OK... now we got something to work with ... ;-)

Time needed to fall a vertical distance of 1.9 m is:

t = √( 2h / g )

t = √[ 2×(1.9 m) / (9.81 m/s²) ]

t = 0.6224 s

In that time, the block must travel a horizontal distance of 4.59 m, so the horizontal velocity is:

r = v×t

(4.59 m) = v×(0.6224 s)

v = 7.37 m/s < - - - - - - - - - - - - - - - - - answer B

That is also the speed of the block as it leaves the spring.

Its kinetic energy at that time is:

KE = m×v²/2

KE = (0.487 kg)×(7.3749 m/s)²/2

KE = 13.244 J

That is also the elastic potential energy stored in the spring at maximum compression. So the spring constant is:

KE = PEe = k×d²/2

(13.244 J) = k×(0.047 m)²/2

k = 12 N/m < - - - - - - - - - - - - - - - - - - answer A

The gravitational potential energy of the block on the table is:

PEg = m×g×h

PEg = (0.487 kg)×(9.81 m/s²)×(1.9)

PEg = 9.077 J

The total energy of the block on the table is:

TE = PEg + PEe

TE = (9.077 J) + (13.244 J)

TE = 22.32 J

When hitting the ground, all that energy is converted to kinetic energy, so

TE = KE = m×v²/2

(22.32 J) = (0.487 kg)×v²/2

v = 9.57 m/s < - - - - - - - - - - - - - - - - - - answer C

...Show more
Technobuff
Lv 7

8 years ago

There must be a height above ground and a distance from the end of the track on the "as shown in the figure below".??
STALKER
Lv 4

8 years ago

use f=kl

where k is the spring constant and l is extension from the natural length.

k=f/l

since you have mass in grams. use w=mg

w=0.487 x 9.8 = 4.77N

Now use the equation,

k=4.77/4.7

k=1.012

Note: my answer could be wrong since I do not know the springs original length from the diagram shown. But, the method of working out spring constant is same.

...Show more

Still have questions? Get your answers by asking now.

Next Question

ひいらぎ

Lv 5

asked in Science & MathematicsPhysics · 1 decade ago

Physics Momentum, Rolling?

Pat builds a track for his model car out of wood. The track is 10.00 cm wide and 3.00 m long, and is solid. The runway is cut such that it forms a parabola by the equation y=(x - 3)^2/9. Locate the horizontal position of the center of gravity of this track.
 
A washing machine load in the "spin" cycle, (much like a centrifuge used to separate fluids), can be modeled as a cylinder which has zero density toward the center, and starting from some inner radius where the clothes (or fluids) begin, increases in density as you move radially outward. The washing machine has density of clothes (in SI units) of p=14r+5, a height of 0.51 m, and only has clothes present from inner radius 0.2m out to 0.7m from the center.
-What is the moment of Inertia of the wash load?
-What is the power of motor that drives the clothes from rest up to 4 rev/sec, in 14 seconds if the basin has moment of Inertia of 4 kg*.m2
...Show more

Physics Momentum, Rolling?

1 Answer

Relevance

Anonymous

1 decade ago

Favorite Answer

I can't visualize the first problem.

The second: Moment of inertia is I = m r^2. In a shell of thickness dr there is a mass of p * 2 * pi * r * h * dr. The moment of inertia of the shell is 2 pi h p r^3 dr. Now integrate this from r = 0.2m to r = 0.7m.

Kinetic energy is 1/2 m v^2. In rotations the moment of inertia is like the mass and the angular velocity is like the velocity, so rotational energy is 1/2 I omega^2. Omega is in rad/s. The total inertia of the system is the sum of the inertia of the clothes and the basin. Divide the energy by the time needed to get the power.

...Show more

Still have questions? Get your answers by asking now.

Next Question

asked in Science & MathematicsPhysics · 1 decade ago

Physics:You and your friends push a 75-kg...Help!?

You and your friends push a 75-kg greased pig up an aluminum slide at the county fair, starting from the low end of the slide. The coefficient of kinetic friction between the pig and the slide is 0.070.
 
(a) All of you pushing together (parallel to the incline) manage to accelerate the pig from rest at the constant rate of 4.9 m/s2 over a distance of 1.8 m, at which point you release the pig. The pig continues up the slide, reaching a maximum vertical height above its release point of 50 cm. What is the angle of inclination of the slide? __degree
 
(b) At the maximum height the pig turns around and begins to slip down the slide, how fast is it moving when it arrives at the low end of the slide? __m/s
...Show more

Physics:You and your friends push a 75-kg...Help!?

1 Answer

Relevance

Anonymous

1 decade ago

Favorite Answer

♣the distance the pig was pushed up is

s=0.5*a*t^2, where s=1.8m, a=4.9m/s^2, t is time of push-up;

speed of the pig gained after s=1.8m is v=a*t; thus v^2=2as;

♠ kinetic energy of the pig at the moment it’s released after push-up is

E=0.5*m*v^2, which is enough for the pig to move by itself L distance more along the ramp, where L=h/sin(b), h=50cm=0.5m, b is angle in question;

♦pig’s potential energy at vertex (when stopped) is E1=mgh;

the energy E2=E-E1 is gone on friction, that is E2=f*L is work of friction, where

f=μ*w1, w1=mg*cos(b) is component of pig’s weight normal to the aluminum ramp; or;

f= μ*mg*cos(b);

♦Thus E2=E-E1; or; f*L = 0.5*m*v^2 –mgh; or;

(μ*mg*cos(b)) * (h/sin(b)) =0.5*m* 2as –mgh; or;

μ*gh*cos(b)/sin(b) =as –gh, hence cot(b) =(as –gh)/(μ*gh), hence

(a); b=atan(μ*gh/(as-gh))= atan(0.07*9.8*0.5/(4.9*1.8 -9.8*0.5)) =5°;

♥ pig’s potential energy above the low end of the ramp is

W= mg*(s*sin(b) +h); pig’s ramp position is p=s +L = s + h/sin(b);

Pig’s final kinetic energy is W1=W-W2, where W2=f*p is work of friction;

and W1=0.5*m*v^2; thus

0.5*m*v^2 = mg*(s*sin(b) +h) – μ*mg*cos(b)*(s + h/sin(b));

v^2 =2g*(s*sin(b) +h)*(1 –μ*cot(b)) =2.575;

(b); v =1.605 m/s;

...Show more

Still have questions? Get your answers by asking now.

+100

Join Yahoo Answers and get 100 points today.

Trending Questions

what is centripetal vs centrifugal in terms of circular motion?
8 answers
The Universe cant magic into existence, it has to have a cause. If it has a cause, it can only be eternal?
10 answers

emeraldchimpanzee424

x.Hm

I just need help in the three questionI figure the last question

1)Consider an oxygen molecule (O2) rotating inthe xy plane about the z axis. The axis

passes through the center of the molecule,perpendicular to its length. The mass of each

oxygen atom is 2.66 x 10

-26 kg, and at room temperature the average separation between

the two atoms is

d=1.21 x 10-10 m (the atoms are treated as point masses).a) Calculate

the moment of inertia of the molecule about the zaxis. b) If the angular speed of the

molecule about the

z axis 4.60 x 1012 rad/s, what is its rotational kineticenergy?

Answer: a) 1.95 x 10

-46 kg.m2 b) 2.06 x 10-21 J

2) A wheel rotates with a constant angularacceleration of 3.50 rad/s2. If the angular speed

of the wheel is 2.00 rad/s at

ti = 0, a) through what angle does the wheel rotate in2.00 s?

Answer a) 6300

3)A uniform rod of length L and mass M is free to rotate on africtionless pin passing

through one end as shown in question 4 below. Therod is released from rest in the

horizontal position. a) What is its angular speedwhen it reaches its lowest position?

b) Determine the linear speed of the center ofmass and the linear speed of the lowest

point on the rod when it is in the verticalposition.

Answer: a)

3g b) Center of mass speed =3gL

1 ;

Linear speed of the lowest point =3gL

(Hint, use mechanical energy conservation)

4 A uniform rod of length L and mass M is attached at one endto a frictionless pivot and is

free to rotate about the pivot in the verticalplane, as shown in Figure below. The rod is

released from rest in the horizontal position. a)What is the initial angular acceleration of

the rod and b) the initial linear acceleration ofits right end? Answer: a)

Answer: a)

g b) Center of mass speed = 3gL

1 ;

Linear speed of the lowest point =3

(Hint, use mechanical energyconservation)

A playground ride consists of a disk of mass M = 56 kg and radius R= 2.0 m mounted on a low-friction axle. A child of mass m = 21 kgruns at speed v = 2.8 m/s on a line tangential to the disk andjumps onto the outer edge of the disk.

ANGULAR MOMENTUM
(a) Consider the system consisting of the child and the disk, butnot including the axle. Which of the following statements are true,from just before to just after the collision?
The momentum of the system doesn't change.
The momentum of the system changes.
The axle exerts a force on the system but nearly zero torque.
The torque exerted by the axle is zero because the force exerted bythe axle is very small.
The angular momentum of the system about the axle changes.
The angular momentum of the system about the axle hardlychanges.
The torque exerted by the axle is nearly zero even though the forceis large, because || is nearly zero.

(b) Relative to the axle, what was the magnitude of the angularmomentum of the child before the collision?
|C| = kgÂ·m2/s
(c) Relative to the axle, what was the angular momentum of thesystem of child plus disk just after the collision?
|C| = kgÂ·m2/s
(d) If the disk was initially at rest, now how fast is it rotating?That is, what is its angular speed? (The moment of inertia of auniform disk is Â½MR2.)
= radians/s
(e) How long does it take for the disk to go around once?
Time to go around once = s
ENERGY
(f) If you were to do a lot of algebra to calculate the kineticenergies before and after the collision, you would find that thetotal kinetic energy just after the collision is less than thetotal kinetic energy just before the collision. Where has most ofthis energy gone?
Increased chemical energy in the child.
Increased thermal energy of the disk and child.
Increased translational kinetic energy of the disk.

MOMENTUM
(g) What was the speed of the child just after the collision?
v = m/s
(h) What was the speed of the center of mass of the disk just afterthe collision?
vcm = m/s
(i) What was the magnitude of the linear momentum of the disk justafter the collision?
|p| = kgÂ·m/s
(j) Calculate the change in linear momentum of the systemconsisting of the child plus the disk (but not including the axle),from just before to just after impact, due to the impulse appliedby the axle. Take the x axis to be in the direction of the initialvelocity of the child.
px = px,f - px,i = kgÂ·m/s

ANGULAR MOMENTUM
(k) The child on the disk walks inward on the disk and ends upstanding at a new location a distance R/2 = 1 m from the axle. Nowwhat is the angular speed? (It helps to do this analysisalgebraically and plug in numbers at the end.)
= radians/s
ENERGY
(l) If you were to do a lot of algebra to calculate the kineticenergies in part (k), you would find that the total kinetic energyafter the move is greater than the total kinetic energy before themove. Where has this energy come from?
Decreased chemical energy in the child.
Decreased momentum of the disk.
Decreased thermal energy of the disk and child.

PHYS 1501Q Lecture Notes - Lecture 20: International System Of Units, Elastic Collision, Projectile Motion

PHYS 1501Q Lecture 19: PHYS 1501Q - Lecture 19 - Forces and Potential Energy and Center of Mass

PHYS 1501Q Lecture Notes - Lecture 20: International System Of Units, Elastic Collision, Projectile Motion

PHYS 1501Q Lecture 21: PHYS 1501Q - Lecture 21 - Conservation of Linear Momentum and Rotational Kinematics

Document Summary

Get access

Related textbook solutions

Physics: Principles with Applications

Related Documents

PHYS 1501Q Lecture Notes - Lecture 25: Friction, Angular Velocity, Angular Acceleration

PHYS 1501Q Lecture Notes - Lecture 24: Angular Velocity, Angular Acceleration, International System Of Units

PHYS 1501Q Lecture Notes - Lecture 29: Angular Velocity, Angular Acceleration, Kinetic Energy

Related Questions

2 Answers

What is the spring constant? please help me!!!!?

3 Answers

Physics Momentum, Rolling?

1 Answer

Physics:You and your friends push a 75-kg...Help!?

1 Answer

Trending Questions