answer

watching

views

13 Dec 2019

At what temperature is the equilibrium vapor pressure of water about 400 torr?

Choose one answer.

a. 30^oC

b. 45^oC

c. 60^oC

d. 80^oC

Which of the following statements are true about evaporation for a liquid?

Help: Evaporation

Choose at least one answer.

a. Only the most energetic molecules evaporate.

b. This means the average kinetic energy of the remaining molecules decrease.

c. This has no effect on the average kinetic energy of the remaining molecules.

d. Consequently, the temperature of the remaining liquid drops, that is, evaporation is a cooling process.

e. Consequently, the temperature of the remaining liquid stays the same.

All but one of the following statement is true. Using your everyday experience, check the false one.

Choose one answer.

a. Evaporation takes place from the surface of water.

b. A cup of soup in a bowl cools more slowly than a cup of soup on a large plate.

c. Hot water evaporates from a pan faster than cool water.

d. Water evaporates as a gas or vapor.

e. The vapor pressure of room temperature water in a sealed glass continues to rise until the glass breaks.

f. The vapor pressure of room temperature water in a sealed glass reaches an equilibrium vapor pressure, that is, the evaporation rate of water equals its condensation rate from the gas phase.

answer

watching

262

views

For unlimited access to Homework Help, a Homework+ subscription is required.

You have 0 free answers left.
Get unlimited access to 3.8 million step-by-step answers.

Get unlimited access

Already have an account? Log in

Nestor RutherfordLv2

17 Dec 2019

Unlock all answers

Get 1 free homework help answer.

Already have an account? Log in

Join us on Discord

Chemistry Study Group

Join now

Related questions

2.There are four equal-sized bowls with equal amounts of milk.

Bowl A is covered, and the milk is at room temperature.
Bowl B is uncovered, and the milk is warmer than room temperature.
Bowl C is uncovered, and the milk is cooler than room temperature.
Bowl D is uncovered, and the milk is at room temperature.

Which bowl has the highest vapor pressure?

A.bowl A

B.bowl B

C.bowl C

D.bowl D

3.Cup A and cup B are identical. They contain equal volumes of soup at equal temperatures. Both cups are put in a refrigerator. Cup A has a lid, but cup B does not. Which statement best explains why cup A will cool more slowly than cup B?

A.Water vapor wonât be able to escape from cup A.

B.The most energetic water molecules from cup A will escape more rapidly.

C.No molecules will be able to evaporate at the surface of cup B.

D.No molecules will be able to evaporate at the surface of cup A.

4. Based on the enthalpy changes given for the reactions, which reactions are endothermic? CHOOSE ALL THAT APPLY

2H₂O â 2H₂ + O₂, ÎH = 484 kJ

C + O₂ â CO₂, ÎH = -394 kJ

H₂ + Br₂ â 2HBr, ÎH = -73 kJ

2NH₃ â N₂ + 3H₂, ÎH = 92 kJ

* Circle the intermolecular force(s) that is/are present in each of the following species. [Hint: there may be more than one correct answer.]

Ar (hydrogen bonding, dipole-dipole forces, dispersion forces)

CH4 (hydrogen bonding, dipole-dipole forces, dispersion forces)

HBr (hydrogen bonding, dipole-dipole forces, dispersion forces)

HF (hydrogen bonding, dipole-dipole forces, dispersion forces)

CHCl3 (hydrogen bonding, dipole-dipole forces, dispersion forces)

* For the following pairs of atoms/molecules, circle the species that has the higher boiling point.

Ne or Xe

Cl2 or F2

HBr or HF

HCl or HI

H2O or H2S

* Phase changes always associate with change of enthalpy. For the following situations, name the phase

transition and indicate whether the process is exothermic or endothermic.

(a) Dry ice (solid carbon dioxide) turns to gaseous carbon dioxide.

Answer:

(b) Water vapor turns to liquid water.

Answer:

(d) Iodine vapor turns to solid iodine.

Answer:

(e) Liquid helium turns to helium gas.

Answer:

* True or false

1. Intermolecular forces are stronger than ionic and covalent bonds. Answer:

2. For molecules with similar size and molar mass, those with higher polarity would have higher boiling

point. Answer:

3. Ion-dipole forces exist between ionic potassium bromide and polar water.

Answer:

4. Dispersion forces exist between argon and helium. Answer:

5. Instantaneous dipoles exist in all molecules and atoms. Answer:

6. The strength of dispersion forces depends on the molar mass but the shape of the molecules have no effect on dispersion forces. Answer:

7. Ice has a higher density than water because ice has an ordered cagelike structure. Answer:

8. Liquids with weaker intermolecular interactions have lower viscosity. Answer:

9. Viscosity decreases with increasing temperature. Answer:

10. For any molecules, the heat of vaporization is always lower than the heat of fusion because it takes more energy to make molecules to move past one another in a solid lattice. Answer:

Seperation lab: Will rate question

Separation lab - will choose best answer

Seperation lab: will choose best answer

Separation of a Mixture Laboratory

In this experiment we will separate the different components of a mixture made up of sand (SiO2) and sodium chloride (NaCl, commonly known as salt). Both of these compounds are solid white crystals, so it is difficult to tell them apart with the naked eye. However, each component exhibits different physical properties that can be used to separate one from the other. There are several physical separation techniques that can be used to determine the percent composition of the original mixture.

Materials & Apparatus:

Sand/salt mixture provided in your Lab Kit

2 - Erlenmeyer Flasks

Scale

Water

Graduated Cylinder

Background:

It is important to know how to separate mixtures because many reactions carried out in the laboratory produce mixtures of different compounds. It is often necessary to separate the components of these mixtures, which can be done using several techniques. We will explore a few of these techniques: sublimation, filtration, evaporation and decantation.

Sublimation is the process of a substance passing from the solid to the gaseous state without first passing through the liquid state. Not all substances possess this characteristic. In fact, most substances to NOT sublime under normal conditions, but must be placed under low pressure and low temperature. Ammonium chloride (NH4Cl) and iodine (I2) are both substances that do sublime under normal conditions.

Filtration is the process used to separate the components of a mixture of solid substances that differ in solubility in a certain solvent. You can separate a mixture of solid substances by adding a liquid to the original mixture in which only some of the components of the mixture will dissolve. The resulting mixture, which contains both the dissolved and undissolved substances, is then poured through a filter paper--a porous paper that allows liquids to pass through while retaining any solids. The liquid that has passed through the filter paper is called the filtrate; the solid on the paper is the residue.

Evaporation can also be used to separate the solvent from the solution. A solution can be slowly heated in an Erlenmeyer flask, and the solute will remain after the solvent has evaporated.

Decantation is the process of separating a liquid from a solid (sediment) by gently pouring the liquid from the solid so as not to disturb the solid.

For this experiment, a practical plan is as follows: First combine the solid mixture of the two compounds, sodium chloride (NaCl) and sand (SiO2), with water. This will dissolve the sodium chloride. The sand will not dissolve into the water. We will "filter" the entire mixture, which allows the water in which the sodium chloride is dissolved to pass through, but not the sand. We will now have separated the sodium chloride and the sand. Then, we must evaporate off the water so that we weigh only the two original solids and not the water we added.

Procedure:

(NOTE: Do NOT dispose of any part of your lab until you are 100% positive you do not need it again. It is good practice to keep all parts of your lab until you are finished.)

Record the letter (A, B, C, or D) of your mixture (on the bag contents label) on the line above Data Table 1 below.

Obtain an Erlenmeyer flask [label it 1] and weigh and record the mass.

Add the entire contents of your unknown mixture bag to the flask and weigh and record the mass of the Erlenmeyer flask and the mixture.

Add 10 mL of water (preferably distilled) to the solid in the Erlenmeyer flask [Erlenmeyer flask 1] and stir gently for 5 minutes.

Weigh a new clean, dry Erlenmeyer flask [Erlenmeyer flask 2].

Decant the liquid from Erlenmeyer flask 1 into Erlenmeyer flask 2. This may work better if you place a utensil against the lip of the pouring flask to encourage a slow steady stream of liquid into the second flask.

Add another 10 mL of water to the solid in Erlenmeyer flask 1, stir for 1-2 minutes, and decant this liquid into the Erlenmeyer flask 2 as before.

Repeat with still another 10 mL of water. This process extracts (dissolves) the soluble sodium chloride from the insoluble sand.

Allow the two flasks to dry. Let them dry until the sand appears dry and freely moves when you shake the Erlenmeyer flask a little and the sodium chloride looks dry.

To speed up the process, you can heat the flasks slowly over a burner set on low on your stove top or in the oven (set at 125-200ËF). I would suggest heating it on top of another pan (NOT nonstick coated) Use a low setting and watch closely as you donât want it to boil over.

Allow the Erlenmeyer flasks to cool to room temperature (if they were heated) and weigh the Erlenmeyer flasks and their contents separately. Record their masses in the appropriate sections of the table.

To ensure that there is no water remaining, heat for another 5-10 minutes oven or 1-2 minutes on the stove. Allow to cool to room temperature and reweigh the Erlenmeyer flask. If it is within 0.3 g of your initial weighing you can stop. If the second weighing is not within 0.3 g of your initial weighing, reheat again, cool, and reweigh. The difference between this mass and the mass of the empty Erlenmeyer flask is the mass of NaCl.

Unknown Mixture Label (A, B, C, or D) ___________

Data Table 1

Measure or calculate and record the following (in grams):
mass of the empty Erlenmeyer flask 1:
mass of the Erlenmeyer flask 1 plus the mixture sample:
mass of the mixture sample:
mass of the Erlenmeyer flask 1 and the remaining contents after drying of sand:
mass of Erlenmeyer flask 1 and dry sand (2nd weighing)
Subtract (a) from (e) to obtain the mass of sand in the sample:
Measure or calculate and record the following (in grams):
mass of an empty Erlenmeyer flask 2:
mass of Erlenmeyer flask 2 and dry NaCl (1st weighing)
mass of Erlenmeyer flask 2 and dry NaCl (2nd weighing)
mass of Erlenmeyer flask 2 and dry NaCl (3rd weighing) if necessary
measured mass of dry NaCl:

Assignment Questions (all work must be shown for all calculations):

Using the results of your lab, complete all the questions below.

Upload one picture that is representative of your experiment with this report to the appropriate D2L Brightspace Assignments folder.

Complete Data Table 1 located in the Procedure. Make sure to include all your work for all the calculations performed.

The amount of sodium chloride in the original mixture may also be determined indirectly by subtracting the SiO2 mass from the initial sample mass. Calculate the expected mass of NaCl using this method.

Calculate the percent difference of NaCl (Note: This is not % Error, but it is a similar calculation. This is an error calculation that checks precision between the results of the two methods from the following equation: (Note: the unit for this calculation is â% differenceâ)

% difference=measured mass-mass by subtractionmass by subtraction x 100

What is the mass percent of each component in your mixture: SiO2, and NaCl? (Note: the units for this calculation are â% SiO2â and â% NaClâ)

mass percent=mass of componenttotal mass of sample x 100

Error Analysis: Was your % difference from Assignment Question 4 within 10%? Why or why not? Did your two mass percentages in Assignment Question 5 add up to 100%? Why or why not? What were your biggest sources of error in this experiment? What would you do differently if you were to repeat this experiment? Explain.

What type of properties (physical or chemical) are we using to separate the mixture in this laboratory. Explain your answer.

A mixture is found to contain 0.69 g SiO2, 1.05 g of cellulose, and 2.17 g of calcium carbonate. What is the mass percentage of SiO2 in this mixture?

Assume you have a mixture of NH4Cl, sand, and salt and access to a regular chemistry laboratory. How would you separate the three?Write out what your procedure would be in numbered steps. Please research the answer to this question and properly cite your source. It is alright to research using the internet. However, Wikipedia, Yahoo Answers, Ask.com, and other non-scientific sources cannot be used.

Weekly leaderboard

Home

Homework Help 3,900,000

Chemistry 830,000

Unlock all answers

Related textbook solutions

Basic Chemistry

Principles of Chemistry Molecular Approach

Chemistry: Structure and Properties

Principles of Chemistry Molecular Approach

Chemistry: A Molecular Approach

Chemistry: A Molecular Approach

Principles of Chemistry: A Molecular Approach

Chemistry: The Central Science

Related questions

Weekly leaderboard

	a. Only the most energetic molecules evaporate.
	b. This means the average kinetic energy of the remaining molecules decrease.
	c. This has no effect on the average kinetic energy of the remaining molecules.
	d. Consequently, the temperature of the remaining liquid drops, that is, evaporation is a cooling process.
	e. Consequently, the temperature of the remaining liquid stays the same.

	a. Evaporation takes place from the surface of water.
	b. A cup of soup in a bowl cools more slowly than a cup of soup on a large plate.
	c. Hot water evaporates from a pan faster than cool water.
	d. Water evaporates as a gas or vapor.
	e. The vapor pressure of room temperature water in a sealed glass continues to rise until the glass breaks.
	f. The vapor pressure of room temperature water in a sealed glass reaches an equilibrium vapor pressure, that is, the evaporation rate of water equals its condensation rate from the gas phase.