HomeClass Notes1,200,000US530,000

PHYS 2101 Lecture : Lecture 26

7 views3 pages

azuremammoth471

15 Mar 2019

School

Department

Course

Professor

For unlimited access to Class Notes, a Class+ subscription is required.

Document Summary

I know that this is really mean, but there"s a new hw posted more gravity, some. After last night, i"m not really feeling the love . If nothing else, misery loves company, and it appeared that there was a whole lot of company . I"m sure that we"ll know nothing until monday . Friday, we"ll nish uids and start oscillations . The collisions of gas molecules on the wall of the tire keep it in ated. Hydrostatic pressure: water applies a force perpendicular to all of the surfaces in the pool, including the swimmer, the walls of the pool etc. Example: high-heeled shoes can cause tremendous pressure to be applied to the oor. Suppose the radius of a circular heel is 6. 00 10-3 m (~ 0. 5 diameter). At times during normal walking motion, nearly the entire body weight acts perpendicular to the surface of such a heel.

Related textbook solutions

Physics: Principles with Applications

7th Edition, 2013

ISBN: 9780321625922

Related Documents

PHYS 2101 Lecture : Lecture 25

azuremammoth471

PHYS 2101 Lecture : Lecture 23

azuremammoth471

PHYS 2101 Lecture : Lecture26

azuremammoth471

Related Questions

A boy in a wheelchair (total mass 50.5 kg) has a speed of 1.40 m/s at the crest of a slope 2.40 m high and 12.4 m long. At the bottom of the slope, his speed is 6.50 m/s. Assume air resistance and rolling resistance can be modeled as a constant friction force of 41.0 N. Find the work he did in pushing forward on his wheels during the downhill ride.

2 Answers

electron1
Lv 7

4 years ago

There are two forces that cause the wheelchair to accelerate. These two forces are the component of the wheelchair’s weight that is parallel to the hill and the force the boy exerts. The net force on the wheelchair is equal to the sum of these two forces minus the friction force. Let’s use the following equation to determine the acceleration.

vf2 = vi^2 + 2 * a * d

6.5^2 = 1.4^2 + 2 * a * 12.4

24.8 * a = 40.29

a = 40.29 ÷ 24.8

This is approximately 1.62 m/s^2.

Net force = 50.5 * 40.29 ÷ 24.8 = 2034.645 ÷ 24.8

This is approximately 82 N.

Force parallel = 50.5 * 9.8 * 2.40 ÷ 12.4 = 1187.76 ÷ 12.4

This is approximately 95.8 N. This force and the force that the boy exerts are the forces that cause the wheelchair to accelerate.

Net force = F + (1187.76 ÷ 12.4) – 41

Set the two net forces equal to each other.

F + (1187.76 ÷ 12.4) – 41 = 2034.645 ÷ 24.8

F = 41 + (2034.645 ÷ 24.8) – (1187.76 ÷ 12.4)

F is approximately 27.3 N

Work = [41 + (2034.645 ÷ 24.8) – (1187.76 ÷ 12.4)] * 12.4 = 337.9625 J
JupiterSky
Lv 6

4 years ago

His change in kinetic energy is due to gravitational- and his own work,

while the friction does negative work.

∆K = ∆U +∆W + ∆Wf

½m(Vf²−Vi²) = mgh + ∆W + Ff*d

∆W = ½m(Vf²−Vi²) − mgh − Ff*d

∆W = ½*50.5(6.5²−1.4²) − (50.5*9.8*2.4) − (−41*12.4)

∆W = 508 J

Still have questions? Get your answers by asking now.

asked in Science & MathematicsPhysics · 8 years ago

What is the spring constant? please help me!!!!?

A block of mass 487 g is pushed against the
spring (located on the left-hand side of the
track) and compresses the spring a distance
4.7 cm from its equilibrium position (as shown
in the ﬁgure below). The block starts from
rest, is accelerated by the compressed spring,
and slides across a frictionless horizontal track
(as shown in the ﬁgure below). It leaves the
track horizontally, ﬂies through the air, and
subsequently strikes the ground.
acceleration = 9.81
 
A) What is the spring constant?
B)What is the speed v of the block when it leaves
the track?
C) What is the total speed of the block when it
hits the ground?
...Show more

Height Above ground = 1.9 m
Lands = 4.59m away

What is the spring constant? please help me!!!!?

3 Answers

Jánošík
Lv 7

8 years ago

Favorite Answer

I'm sure there is some crucial information in "the figure below" !!!

Edit:

OK... now we got something to work with ... ;-)

Time needed to fall a vertical distance of 1.9 m is:

t = √( 2h / g )

t = √[ 2×(1.9 m) / (9.81 m/s²) ]

t = 0.6224 s

In that time, the block must travel a horizontal distance of 4.59 m, so the horizontal velocity is:

r = v×t

(4.59 m) = v×(0.6224 s)

v = 7.37 m/s < - - - - - - - - - - - - - - - - - answer B

That is also the speed of the block as it leaves the spring.

Its kinetic energy at that time is:

KE = m×v²/2

KE = (0.487 kg)×(7.3749 m/s)²/2

KE = 13.244 J

That is also the elastic potential energy stored in the spring at maximum compression. So the spring constant is:

KE = PEe = k×d²/2

(13.244 J) = k×(0.047 m)²/2

k = 12 N/m < - - - - - - - - - - - - - - - - - - answer A

The gravitational potential energy of the block on the table is:

PEg = m×g×h

PEg = (0.487 kg)×(9.81 m/s²)×(1.9)

PEg = 9.077 J

The total energy of the block on the table is:

TE = PEg + PEe

TE = (9.077 J) + (13.244 J)

TE = 22.32 J

When hitting the ground, all that energy is converted to kinetic energy, so

TE = KE = m×v²/2

(22.32 J) = (0.487 kg)×v²/2

v = 9.57 m/s < - - - - - - - - - - - - - - - - - - answer C

...Show more
Technobuff
Lv 7

8 years ago

There must be a height above ground and a distance from the end of the track on the "as shown in the figure below".??
STALKER
Lv 4

8 years ago

use f=kl

where k is the spring constant and l is extension from the natural length.

k=f/l

since you have mass in grams. use w=mg

w=0.487 x 9.8 = 4.77N

Now use the equation,

k=4.77/4.7

k=1.012

Note: my answer could be wrong since I do not know the springs original length from the diagram shown. But, the method of working out spring constant is same.

...Show more

Still have questions? Get your answers by asking now.

asked in Science & MathematicsPhysics · 1 decade ago

Physics Momentum, Rolling?

Pat builds a track for his model car out of wood. The track is 10.00 cm wide and 3.00 m long, and is solid. The runway is cut such that it forms a parabola by the equation y=(x - 3)^2/9. Locate the horizontal position of the center of gravity of this track.
 
A washing machine load in the "spin" cycle, (much like a centrifuge used to separate fluids), can be modeled as a cylinder which has zero density toward the center, and starting from some inner radius where the clothes (or fluids) begin, increases in density as you move radially outward. The washing machine has density of clothes (in SI units) of p=14r+5, a height of 0.51 m, and only has clothes present from inner radius 0.2m out to 0.7m from the center.
-What is the moment of Inertia of the wash load?
-What is the power of motor that drives the clothes from rest up to 4 rev/sec, in 14 seconds if the basin has moment of Inertia of 4 kg*.m2
...Show more

Physics Momentum, Rolling?

1 Answer

Anonymous

1 decade ago

Favorite Answer

I can't visualize the first problem.

The second: Moment of inertia is I = m r^2. In a shell of thickness dr there is a mass of p * 2 * pi * r * h * dr. The moment of inertia of the shell is 2 pi h p r^3 dr. Now integrate this from r = 0.2m to r = 0.7m.

Kinetic energy is 1/2 m v^2. In rotations the moment of inertia is like the mass and the angular velocity is like the velocity, so rotational energy is 1/2 I omega^2. Omega is in rad/s. The total inertia of the system is the sum of the inertia of the clothes and the basin. Divide the energy by the time needed to get the power.

...Show more

Still have questions? Get your answers by asking now.

asked in Science & MathematicsPhysics · 1 decade ago

Physics:You and your friends push a 75-kg...Help!?

You and your friends push a 75-kg greased pig up an aluminum slide at the county fair, starting from the low end of the slide. The coefficient of kinetic friction between the pig and the slide is 0.070.
 
(a) All of you pushing together (parallel to the incline) manage to accelerate the pig from rest at the constant rate of 4.9 m/s2 over a distance of 1.8 m, at which point you release the pig. The pig continues up the slide, reaching a maximum vertical height above its release point of 50 cm. What is the angle of inclination of the slide? __degree
 
(b) At the maximum height the pig turns around and begins to slip down the slide, how fast is it moving when it arrives at the low end of the slide? __m/s
...Show more

Physics:You and your friends push a 75-kg...Help!?

1 Answer

Anonymous

1 decade ago

Favorite Answer

♣the distance the pig was pushed up is

s=0.5*a*t^2, where s=1.8m, a=4.9m/s^2, t is time of push-up;

speed of the pig gained after s=1.8m is v=a*t; thus v^2=2as;

♠ kinetic energy of the pig at the moment it’s released after push-up is

E=0.5*m*v^2, which is enough for the pig to move by itself L distance more along the ramp, where L=h/sin(b), h=50cm=0.5m, b is angle in question;

♦pig’s potential energy at vertex (when stopped) is E1=mgh;

the energy E2=E-E1 is gone on friction, that is E2=f*L is work of friction, where

f=μ*w1, w1=mg*cos(b) is component of pig’s weight normal to the aluminum ramp; or;

f= μ*mg*cos(b);

♦Thus E2=E-E1; or; f*L = 0.5*m*v^2 –mgh; or;

(μ*mg*cos(b)) * (h/sin(b)) =0.5*m* 2as –mgh; or;

μ*gh*cos(b)/sin(b) =as –gh, hence cot(b) =(as –gh)/(μ*gh), hence

(a); b=atan(μ*gh/(as-gh))= atan(0.07*9.8*0.5/(4.9*1.8 -9.8*0.5)) =5°;

♥ pig’s potential energy above the low end of the ramp is

W= mg*(s*sin(b) +h); pig’s ramp position is p=s +L = s + h/sin(b);

Pig’s final kinetic energy is W1=W-W2, where W2=f*p is work of friction;

and W1=0.5*m*v^2; thus

0.5*m*v^2 = mg*(s*sin(b) +h) – μ*mg*cos(b)*(s + h/sin(b));

v^2 =2g*(s*sin(b) +h)*(1 –μ*cot(b)) =2.575;

(b); v =1.605 m/s;

...Show more

Still have questions? Get your answers by asking now.

Join Yahoo Answers and get 100 points today.

Trending Questions

what is centripetal vs centrifugal in terms of circular motion?
8 answers
The Universe cant magic into existence, it has to have a cause. If it has a cause, it can only be eternal?
10 answers

emeraldchimpanzee424

A playground ride consists of a disk of mass M = 56 kg and radius R= 2.0 m mounted on a low-friction axle. A child of mass m = 21 kgruns at speed v = 2.8 m/s on a line tangential to the disk andjumps onto the outer edge of the disk.

ANGULAR MOMENTUM
(a) Consider the system consisting of the child and the disk, butnot including the axle. Which of the following statements are true,from just before to just after the collision?
The momentum of the system doesn't change.
The momentum of the system changes.
The axle exerts a force on the system but nearly zero torque.
The torque exerted by the axle is zero because the force exerted bythe axle is very small.
The angular momentum of the system about the axle changes.
The angular momentum of the system about the axle hardlychanges.
The torque exerted by the axle is nearly zero even though the forceis large, because || is nearly zero.

(b) Relative to the axle, what was the magnitude of the angularmomentum of the child before the collision?
|C| = kgÂ·m2/s
(c) Relative to the axle, what was the angular momentum of thesystem of child plus disk just after the collision?
|C| = kgÂ·m2/s
(d) If the disk was initially at rest, now how fast is it rotating?That is, what is its angular speed? (The moment of inertia of auniform disk is Â½MR2.)
= radians/s
(e) How long does it take for the disk to go around once?
Time to go around once = s
ENERGY
(f) If you were to do a lot of algebra to calculate the kineticenergies before and after the collision, you would find that thetotal kinetic energy just after the collision is less than thetotal kinetic energy just before the collision. Where has most ofthis energy gone?
Increased chemical energy in the child.
Increased thermal energy of the disk and child.
Increased translational kinetic energy of the disk.

MOMENTUM
(g) What was the speed of the child just after the collision?
v = m/s
(h) What was the speed of the center of mass of the disk just afterthe collision?
vcm = m/s
(i) What was the magnitude of the linear momentum of the disk justafter the collision?
|p| = kgÂ·m/s
(j) Calculate the change in linear momentum of the systemconsisting of the child plus the disk (but not including the axle),from just before to just after impact, due to the impulse appliedby the axle. Take the x axis to be in the direction of the initialvelocity of the child.
px = px,f - px,i = kgÂ·m/s

ANGULAR MOMENTUM
(k) The child on the disk walks inward on the disk and ends upstanding at a new location a distance R/2 = 1 m from the axle. Nowwhat is the angular speed? (It helps to do this analysisalgebraically and plug in numbers at the end.)
= radians/s
ENERGY
(l) If you were to do a lot of algebra to calculate the kineticenergies in part (k), you would find that the total kinetic energyafter the move is greater than the total kinetic energy before themove. Where has this energy come from?
Decreased chemical energy in the child.
Decreased momentum of the disk.
Decreased thermal energy of the disk and child.

A playground ride consists of a disk of mass M = 56 kg and radius R= 2.0 m mounted on a low-friction axle. A child of mass m = 21 kgruns at speed v = 2.8 m/s on a line tangential to the disk andjumps onto the outer edge of the disk.

ANGULAR MOMENTUM
(a) Consider the system consisting of the child and the disk, butnot including the axle. Which of the following statements are true,from just before to just after the collision?
The momentum of the system doesn't change.
The momentum of the system changes.
The axle exerts a force on the system but nearly zero torque.
The torque exerted by the axle is zero because the force exerted bythe axle is very small.
The angular momentum of the system about the axle changes.
The angular momentum of the system about the axle hardlychanges.
The torque exerted by the axle is nearly zero even though the forceis large, because || is nearly zero.

(b) Relative to the axle, what was the magnitude of the angularmomentum of the child before the collision?
|C| = kgÂ·m2/s
(c) Relative to the axle, what was the angular momentum of thesystem of child plus disk just after the collision?
|C| = kgÂ·m2/s
(d) If the disk was initially at rest, now how fast is it rotating?That is, what is its angular speed? (The moment of inertia of auniform disk is Â½MR2.)
= radians/s
(e) How long does it take for the disk to go around once?
Time to go around once = s
ENERGY
(f) If you were to do a lot of algebra to calculate the kineticenergies before and after the collision, you would find that thetotal kinetic energy just after the collision is less than thetotal kinetic energy just before the collision. Where has most ofthis energy gone?
Increased chemical energy in the child.
Increased thermal energy of the disk and child.
Increased translational kinetic energy of the disk.

MOMENTUM
(g) What was the speed of the child just after the collision?
v = m/s
(h) What was the speed of the center of mass of the disk just afterthe collision?
vcm = m/s
(i) What was the magnitude of the linear momentum of the disk justafter the collision?
|p| = kgÂ·m/s
(j) Calculate the change in linear momentum of the systemconsisting of the child plus the disk (but not including the axle),from just before to just after impact, due to the impulse appliedby the axle. Take the x axis to be in the direction of the initialvelocity of the child.
px = px,f - px,i = kgÂ·m/s

ANGULAR MOMENTUM
(k) The child on the disk walks inward on the disk and ends upstanding at a new location a distance R/2 = 1 m from the axle. Nowwhat is the angular speed? (It helps to do this analysisalgebraically and plug in numbers at the end.)
= radians/s
ENERGY
(l) If you were to do a lot of algebra to calculate the kineticenergies in part (k), you would find that the total kinetic energyafter the move is greater than the total kinetic energy before themove. Where has this energy come from?
Decreased chemical energy in the child.
Decreased momentum of the disk.
Decreased thermal energy of the disk and child.