ACC 100 Lecture 10: Chapter 10

55 views4 pages

ochrecrocodile426

21 Apr 2016

School

Department

Course

Professor

For unlimited access to Class Notes, a Class+ subscription is required.

Document Summary

The quality decision: the amount of input that should be used per unit of output, produces quantity standards. The pricing decision: the amount that should be paid for quantity of input to be used, produces pricing standards. Standard cost per unit = quantity standard x price standard. Types of standards: ideal standards: demand maximum efficiency and can be achieved only if everything operates perfectly. No machine breakdowns, slack, or lack of skill are allowed: currently attainable standards: can be achieved under efficient operating conditions, allowance is made for normal breakdowns, interruptions, less than perfect skills, demanding by achievable. Information can be accessed at any time which makes it easier to make price decisions because actual costs do not need to be known. Standard costs are developed fro direct material, labor, and overhead, using these costs the standard cost per unit is computed. Standards quantity of material allowed = unit quantity standard x actual output.

Related Questions

A decentralized organization is one in which:

a. each stockholder is given decision-making authority.

b. only top-level management is given decision-makingauthority.

c. each employee in the organization is given permission to makedecisions about their company.

d. managers at various levels throughout the organization aregiven decision-making authority.

A local chain department store grants each of its store managersthe authority to make buying decisions for their stores. Grantingmanagers this kind of authority is found in which type oforganization?

a. Desegmented

b. Centralized

c. Segmented

d. Decentralized

A local chain electronics store does not allow its store ordistrict managers to make important decisions about their stores.The main role of store managers is to supervise employees and makesure day-to-day transactions run smoothly while district managerssupervise store managers and report profitability data back totop-level management. Not allowing store or district managersdecision-making authority is most likely to be found in which typeof organization?

a. Centralized

b. Desegmented

c. Segmented

d. Decentralized

When a few individuals at the top of an organization retaindecision-making authority, the organization is referred to asa(n):

a. investment center.

b. centralized organization.

c. decentralized organization.

d. profit center.

Which of the following statements regarding the structure oforganizations is false?

a. In a decentralized organization, decision-making authority isconfined to top-level management.

b. Decentralization may make it difficult for managers to shareunique and innovative ideas.

c. When decision-making authority is spread among too manymanagers, managers may become so concerned with their own area ofresponsibility that they lose sight of the company's overallfocus.

d. In a decentralized organization, there may be a lack ofcoordination and communication between segments.

Which of the following is an advantage of decentralization?

a. It allows top-level management who normally work at corporateheadquarters to get involved with the day-to-day decisions thatneed to be made at lower levels.

b. It allows managers to focus on their own area ofresponsibility rather than what is best for the company as awhole.

c. It requires very little as far as manager training costs.

d. It allows decisions to be made in a more timely manner.

Which of the following is not an advantage ofdecentralization?

a. It allows lower-level managers to focus on their ownparticular goals and objectives without having to consider theoverall company's goals and objectives.

b. It allows top-level managers more time to devote tolong-range strategic planning.

c. It permits lower-level managers to gain valuable on-the-jobtraining in order to become better managers.

d. It often creates higher job satisfaction for managers.

Which of the following is often not a disadvantage ofdecentralization?

a. Lack of coordination and communication between segments.

b. Higher training costs for lower-level managers.

c. Lack of company focus as lower-level managers may makedecisions that benefit their own particular segment.

d. Decreased job satisfaction for lower-level managers.

Which of the following is a disadvantage ofdecentralization?

a. Lower training costs for lower-level managers.

b. Less timely decisions are able to be made on a day-to-daybasis.

c. Decreased job satisfaction for lower-level managers.

d. Lack of coordination and communication between segments.

"Responsibility accounting" is the concept that says:

a. managers should be responsible for both revenues and costs oftheir particular segment.

b. managers should be held entirely responsible for allinvestment decisions that impact the particular segment in whichthey are in charge.

c. managers should be held responsible for only those thingsunder their control.

d. managers should never be held entirely responsible for thingsthat happen within the particular segment in which they are incharge.

A budget for a single unit of a product or service is called asa:

a. real cost.

b. fixed cost.

c. total cost.

d. standard cost.

Which of the following statements is true regarding the budgetedcost for direct materials?

a. It must be determined after materials are purchased for theyear.

b. It can not be determined if a company uses a just-in-timeinventory system.

c. It would consist of two components - a standard quantity anda standard price.

d. It would be used on a static budget but not a flexiblebudget.

Variance analysis compares:

a. standard costs and actual costs.

b. static budgets and flexible budgets.

c. product costs and period costs.

d. practical standards and ideal standards.

Which of the following statements is false regarding taskanalysis?

a. It uses actual historical data in the determination ofstandard costs.

b. It emphasizes what it should cost to produce a product ratherthan historical costs.

c. It examines the production process in detail.

d. It may involve the use of engineers.

Task analysis:

a. is used to set standard costs.

b. is used to determine the tasks that production employeesshould complete on a daily basis.

c. is used to evaluate employee performance.

d. emphasizes the historical costs of a product.

A(n) ____ is attainable only when near-perfect conditionsexist.

a. static budget

b. ideal standard

c. flexible budget

d. practical standard

In most companies, machines break down occasionally andemployees are often less than perfect. Which type of standardacknowledges these characteristics when determining the standardcost of a product?

a. Practical standard

b. Ideal standard

c. Efficiency standard

d. Budgeted standard

Hathaway Inc. produces and sells golf umbrellas to localresorts. Hathaway anticipates April to be a busy month with thesale of 2,000 umbrellas. The company has prepared the followingstatic budget for April:

Sales revenue (2,000 units)	$60,000
Variable costs:
Direct materials	6,000
Direct labor	8,000
Overhead	2,500
Fixed costs	6,000
Net operating income	$37,500

During April, Hathaway actually produced and sold 2,300 umbrellas.What should be Hathaway's net operating income in April based on aflexible budget?

a. $35,025

b. $43,125

c. $44,025

d. $37,500

Hoppe Inc. manufactures widgets. Management has determined thateach widget has a standard materials cost of $3.50 when 2.5 ouncesof raw material at a cost of $1.40 per ounce are used. The staticbudget for the month of December showed an estimated production of4,000 widgets in December. During December, 4,300 widgets wereactually produced. The actual cost for each widget was $3.60 when2.25 ounces of raw material at a cost of $1.60 per ounce werepurchased and used. What should be the total direct materials costaccording to Hoppe's flexible budget for December?

a. $14,000

b. $15,480

c. $14,400

d. $15,050

Violetta Inc. manufactures plastic storage boxes. Management hasdetermined that each medium-sized box has a standard materials costof $1.20 when 4 pounds of raw material at a cost of $.30 per poundare used. The static budget for the month of March showed anestimated production of 15,000 boxes in March. During March, 17,000boxes were actually produced. The actual cost for each box was$1.56 when 3.9 pounds of raw material at a cost of $.40 per poundwere purchased and used. What should be the total direct materialscost according to Violetta's flexible budget for March?

a. $26,520

b. $23,400

c. $18,000

d. $20,400

LOOKING FOR SOLUTION TO PART 2,3,4

Section I: Cost-Volume-Profit Analysis

The Hampshire Company manufactures umbrellas that sell for$12.50 each. In 2014, the company made and sold 60,000 umbrellas.The company had fixed manufacturing costs of $216,000. It also hadfixed costs for administration of $79,525. The per-unit costs ofeach umbrella are as follows:

Direct Materials: $3.00

Direct Labor: $1.50

Variable Manufacturing Overhead:$0.40

Variable Selling Expenses: $1.10

Using the information above, perform a cost-volume-profit (CVP)analysis by completing the steps below. All CVP calculations shouldbe completed in the Hampshire Company Spreadsheet. Note:The CVP analysis satisfies Part A of Section I.

Compute net income before tax.

Compute the unit contribution margin in dollars and thecontribution margin ratio for one umbrella.

Calculate the break-even point in units and dollars of revenue.Note: This is a required part of the CVP analysis andsatisfies Part C of Section I.

Calculate the margin of safety:

In units

In sales dollars

As a percentage

Calculate the degree of operating leverage.

Assume that sales will increase by 20% in 2015. Calculate thepercentage of before-tax income for this increase. Providecalculations to prove that your percentage increase is correctbased on the operating leverage calculated in step 5.

Compute the number of umbrellas that Hampshire is required tosell if it plans to earn $150,000 in income before taxes by usingthe target income formula. Proof your calculation.

A company that specializes in tours in England has offered topurchase 5,000 umbrellas at $11 each from Hampshire. The variableselling costs of these additional units will be $1.30 as opposed to$1.10 per unit. Also, this production activity will incur another$15,000 of fixed administrative costs. Should Hampshire agree tosell these additional 5,000 umbrellas to the touring business?Provide calculations to support your decision.

Additionally, complete Parts B and D of Section I as outlined inthe Final Project Guidelines and Rubric document.

Section II: Inventory Management

The information below represents the beginning and endinginventory amounts along with the production and sales for the monthin umbrella units.

Beginning Inventory: 0 Umbrellas

Production: 80,000 Umbrellas

Sales: 60,000 Umbrellas

Ending Inventory: 20,000Umbrellas

Using the information provided above and the costs and salesinformation provided in Section I, complete the following in theHampshire Company Spreadsheet in order to assist you in respondingto all components of Section II:

Prepare a variable costing income statement.

Prepare an absorption costing income statement.

Additionally, complete Parts A through E of Section II asoutlined in the Final Project Guidelines and Rubric document.

Section III: Benchmarking

The management of the Hampshire Company would like to implementbenchmarking. Standard costs have been established and arepresented below. You will want to complete a variance analysis toinclude efficiency and price variances for materials (cloth andhandle assemblies) and labor based on the following data:

Units Produced = 80,000

Units Sold = 60,000

Direct Materials Purchased and Used

Actual square yards of cloth purchased and used: 128,000

Actual price incurred per yard: $1.25

Actual handles purchased and used: 80,808

Actual price per handle/rib/stretcher assembly: $0.99

Direct Manufacturing Labor Used

Actual direct labor hours used: 15,748

Actual price per hour: $7.62

Direct labor costs: $120,000

Standard Rates

Standard labor hours per unit: 0.20

Standard labor price per hour: $7.50

Square yards material per unit: 1.50

Standard price per yard: $1.15

Handle/rib/stretcher assembly per unit: 1

Standard price per handle assembly: $1.05

Companies can use variance analysis and benchmarking to measureperformance within their own company and against competitors. Thiscan be done by setting standards/budgets and comparing a completedvariance analysis to results from prior periods or comparing themto competitorsâ results. Using the information provided above,complete the following calculations (steps 1 and 2) in theHampshire Company Spreadsheet. This will assist you in respondingto all components of Section III.

Calculate price variances for material and labor and denotewhether they are favorable or unfavorable.

Calculate efficiency variances for material and labor and denotewhether they are favorable or unfavorable.

In order to measure performance and make use of the varianceanalysis completed, management understands the need to compareresults with their competitors. Following the steps outlined below,you will research benchmarking and propose the most effectiveapproach for your company. Respond to Parts A through C of SectionIII as outlined in the Final Project Guidelines and Rubricdocument.

Section IV: Alternative Costing Method

Hampshire has always produced stick umbrellas. However, it isconsidering expanding its production to include collapsibleumbrellas. This consideration has been spurred by Tours Today, atouring company that is interested in providing its customers withcollapsible umbrellas imprinted with its logo. The management atHampshire is currently working out a deal with the touring companyto produce 3,000 collapsible umbrellas and believes it can sellthose umbrellas for $14.00 each. Here are the costs that can bedirectly traced to this special order:

Direct Materials: $9,300

Direct Labor Hours: 600

Hourly Rate of Direct labor:$8.00

In the traditional costing approach, overhead is applied at therate of $24.60 per labor hour. This expansion in production willadd additional overhead costs. The total overhead costs (assumingproduction of the stick and collapsible umbrellas) to include thecost pools and cost drivers are provided in Table 2.

An alternative costing method that might benefit Hampshire isthe implementation of activity-based costing (ABC).Hampshire would like to implement an ABC approach to analyze theproduction of this special order of collapsible umbrellas. Thecontroller has assembled the following information:

	Stick	Collapsible
Units Sold	60,000	3,000
Selling Price	$12.50	$14.00
Direct Material Cost per Unit	$3	$3.10
Direct Labor Cost per Hour	$7.50	$8.00
Variable Manufacturing Overhead	$0.40	$0.40
Variable Selling Costs	$1.10	$1.10
Labor Hours per Unit	0.2	0.2
Sales Orders	120	1
Purchase Orders	50	3
Production Runs	45	6
Material Moves	86	10
Machine Setups	130	6
Machine Hours	525	32
Inspections	200	10
Shipments	60	3

Table 1: Direct Cost Information and Activities

Activity	Activity Cost	Activity Cost Driver
Order Processing	$35,000	Number of Sales Orders
Purchasing	$36,000	Number of Purchase Orders
Material Handing	$28,000	Material Moves
Machine Setup	$14,000	Machine Setups
Production	$99,000	Production Runs
Assembly	$80,000	Machine Hours
Inspecting	$11,000	Number of Inspections
Shipping	$7,500	Number of Shipments

Table 2: Activity Cost Pools and Cost Drivers

Another alternative to traditional costing and ABC istime-driven activity-based costing (TDABC). You will need todetermine which of these three methods would be the best approachfor the Hampshire Company. The following article may assist you inyour analysis: Time-Driven Activity-Based Costing. Additionally,you may want to use the Shapiro Library to conduct further researchon the three methods. You will need to defend your position whenanswering the prompts for the written portion of this section.

Using the information provided above, complete the following inthe Hampshire Company Spreadsheet in order to assist you inresponding to all components of Section IV:

1.Calculate the allocation rates foreach cost driver using ABC.

2.Use the traditional costing approachto calculate the total cost and the unit cost of the stick andcollapsible umbrellas.

3.Use ABC to compute the total costsand the unit cost for the stick and collapsible umbrellas.

4.Compute the difference between theproduct cost per stick and collapsible umbrellas using the unitcost that you computed with the traditional approach and the onethat you computed using ABC.

Based on your calculations from steps 1â4, respond to Parts Athrough C in Section IV as outlined in the Final Project Guidelinesand Rubric document.

Section V: Memo to Management

The management of the Hampshire Company is very interested inmeasuring performance. They would like you to recommend a strategyto increase business performance. They are not sure whether theyshould focus on product differentiation or cost leadership.Research additional performance tools to include the balancedscorecard. During your research, consider what performancemeasurements you would use based on the four perspectives. Provideexamples.

In your recommendation, you will want to include the outcome ofyour previous quantitative analysis and research performed relatedto cost-volume-profit (CVP), variable and absorption costing,just-in-time (JIT), standard costs, variances, and benchmarking.You will want to review key points and make recommendations basedon your current research and prior analysis completed and researchperformed.

Your two- to three-page memo to management must be submitted asa Word document and must include your responses to Parts A throughC of Section V as outlined in the Final Project Guidelines andRubric document.

coffeeprairie-dog291

ACC 100 Lecture 10: Chapter 10

Document Summary

Get access

Related Documents

FIN 401 Chapter Notes - Chapter 10: Standard Cost Accounting, Minivan

ACC 406 Lecture Notes - Lecture 9: Standard Cost Accounting, Minivan

ACC 406 Chapter 10: Chapter 10 - Standard Costing A Managerial Control Tool

Related Questions